Currently, the AZT paint calculation provides default results for 3 and 4 coat painting:
The default for 3 and 4 coat painting assumes a Wet on Wet application process.
In some situations, you may wish to override these defaults, and Model Options are provided for this. There is currently a known issue where if these are set on an assessment, they will revert to the default setting for the paint type any time that AudaGraphics is re-opened.
There is currently a known issue where if these are set on an assessment, they will revert to the default setting for the paint type when AudaGraphics is re-opened.
If you need to override the default, the following process should be used:
- Select all required repair operations
- Click the cogwheel to open model options
- Select the required application process
- Close the Model Option Window
- Close AudaGraphics
- Calculate the assessment
Please explicitly state that you have used this workaround in the assessment notes & via an Audamail as when any other person enters the graphics on this assessment, they will need to re-select the relevant model option again.
Our development team is aware of this issue and a fix will be released in a future software release.